Product Description Tobee's 4/3D-THR Rubber Slurry Pumps and parts are 100% equivalent Original 4x3D-THR Slurry Pumps and Parts. 4x3D-THR Rubber Lined Slurry Pump is the heavy duty slurry pump handling tough and abrasive duties. Rubber slurry pumps are widely used for continuous pumping highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage, dredging of settling lagoons and pumping of drilling mud and tailings in minerals plants and other industrial applications. Design Features: √ Double casings design centrifugal rubber lined slurry pump, wide passage for solids √ Bearing assembly & frame: Both standard & high capacity types available. √ A large diameter shaft with a short overhang minimizes deflection and vibration. √ Heavy duty roller bearing is housed in a removable bearing cartridge. √ Rubber slurry pump body is fastened with the frame by minimum bolts. √ Slurry pump impeller adjustment is provided in a convenient position below the bearing assembly. √ Slurry pump Impeller & liner material: natural rubber etc √ High efficiency impeller available: up to 86.5% for certain type. √ Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12. √ Shaft seal: Packing seal, centrifugal seal, mechanical seal. √ Discharge branch: 8 positions in each 45°. √ Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler etc. Tobee® 4/3D-THR Rubber Pump Applications: Heavy Mining | Mineral Processing | Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | SecondaryGrinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport | Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous(Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries || Large Particle Slurries | Sump Drainage Tobee® Rubber Lined Slurry Pumps Applications: Rubber lined slurry pumps are widely used for Mill discharge, Ni acid slurry, Coarse sand, Coarse tailings, Phosphate matrix, Minerals concentrate, Heavy media, Sugar beet, Dredging, Bottom/Fly ash, Lime grinding, Oil sands, Mineral sands, Fine tailings, Slag granulation, Phosphoric acid, Coal, Flotation, Process chemical, Phosphoric acid etc. FAQ 1.Q:Are you a factory or trading company? A:We are a big manufacturing pump factory with 30 years experience. 2.Q:Where is your factory located? How can I visit there? A:Our factory is located in Shijiazhuang City, Hebei Province, China.You can fly to Shijiazhuang airport directly.All our clients, from home or abroad, are warmly welcome to visit us! 3.Q:What is The material of your pumps? A: The materials can be selected by High chrome alloy or Rubber,Polyurethane,Cast iron,SS304,SS316,CD4MCu,Duplex SS,Bronze etc. We can also choose material as customers’ requirement. 4.Q:How can I get some samples? A: We are honored to offer you samples. 5.Q:How does your factory do regarding quality control? A:"Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has 15~20QC. Contact Us HEBEI TOBEE PUMP CO.,LIMITED Sales Engineer / International Dept. Bella Zhang Add: Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China. Mob:+86-17632062190 WhatsApp:+86-17632062190 Fax:+86-0311-87221317 Web: www.tobee.cc Web: www.tobee.store Web: www.hydroman.cn Web: www.tobeepump.com Web: www.slurrypumpsupply.com

Product Description: The oral liquid, syrup, or suspension manufacturing plant system is a closed-circuit manufacturing facility that begins with the feeding of the sugar or water phase and ends with the loading of the volumetric liquid filling machine. It includes the following things. Capacity: 500 Liters to 15000 Liters Brief of Machine: Sugar Melting Vessel Manufacturing Vessel Storage Vessel Bag Filter (Basket Filter) Zero Hold Filter Press Inline Homogenizer Product Piping of Complete Plant Transfer (Centrifugal) / (Lobe) Pump Working Platform Control Panel Steam / Electrical Operated Salient Features: 1) Liquid sugar syrup vessel offering no vibrations of the shaft. 2) There is no coupling in drive assembly that provides for lower maintenance costs of manufacturing and storage vessel. 3) All contact parts are SS 316, and non-contact parts are SS 304. 4) SS 316 construction-based pipes, interconnecting piping. 5) Pipes and fittings come in a seamless, internally electro-polished finish per DIN standards and unions. 6) Designed for internal vacuum to facilitate the transfer of sugar directly from stores to sugar syrup vessels. 7) Melted sugar is transferred to the manufacturing vessel through an online bag filter. The syrup is transferred to the storage vessel through a filter press. 8) Entry of all propeller agitations is from top or bottom through a specially designed mechanical seal face. Additional Information: 1) Sugar Syrup and Manufacturing Vessels with Limpet Coils for Heating and Cooling. 2) Load Cell for Accurate Weighing. 3) PLC-based Control Panel for an automation process. 4) Utility piping under the working platform. Video URL https://www.youtube.com/watch?v=nDwLSk2olYU #liquid manufacturing plant #liquid processing plant #oral liquid manufacturing plant # liquid oral manufacturing plant #

The ointment, cream, lotion, and shampoo plant system consists of a closed-circuit manufacturing facility, from feeding raw materials to loading the hopper of the filling machine. Available capacity: 50 to 5000 kg. Brief of Machine: Manufacturing Vessel Wax Phase Vessel Water Heating Vessel Storage Vessel Ointment Transfer Pump (Lobe Pump) Ointment Transfer Pump (Metering Pump) Control Panel Piping of Complete Plant Working Platform Vacuum Pump Working Platform Steam / Electrical Operated Salient Features: 1) All contact parts are made of SS 316 quality material, are crevice free, and finished to a Class 4B (Mirror) finish. 2) Easily Cleanable. 3) Complete lid lifting arrangements for facility cleaning for the product changeover. 4) A specially designed Becomix stirrer with flexible Teflon scrapers. 5) All transfers are done with a vacuum to avoid hand contact or contamination. 6) The entry of all agitators is from the top, and the high-speed emulsifier is from the bottom or in-line emulsifier (as per customer choice). 7) All vessels are suitable for an internal pressure of 1 kg/sq cm and can be sterilized. 8) All pipes, interconnecting piping, and valves are of SS 304 / SS 316 (as per customer requirement), seamless quality, internally electropolished, and with tri-clover ended joints. 9) All values of temperature and time for the plant are indicated digitally on the control panel. All the inlet and outlet connections have tri-clover joints for easy cleaning and replacement. 10) Capacity: 100 KG to 5 TON Additional Details: 1) Load Cell for Accurate Weighing 2) PLC-based control panel for process automation 3) Utility Piping under the working platform https://harikrushna.com/product/ointment-cream-lotion-shampoo-toothpaste-manufacturing-plant/ https://www.youtube.com/watch?v=tpmjITAsRJk

The semi-automatic air jet vacuum cleaning machine consists of a main structure, an ionizer, an air nozzle, and a vacuum suction blower. Salient Features: 1) The machine is built or developed per GMP standards. 2) The structure is made of SS 304. 3) Rigid, vibration-free construction for trouble-free performance. 4) Contact parts are made of SS 316. 5) Two different nozzles for cleaning bottles 6) Manually load bottles onto the bottle holder. 7) A pressure regulator with a pressure switch is optionally provided. 8) Adjustable cleaning unit height based on the height of the bottles or containers 9) It is simple to use and requires little maintenance. 10) The machine generates high air velocities for effective container cleaning. 11) Machine with a foot-operated switch 12) The machine includes a vacuum blower to suck loosened particles from the container's inner surface. 13) The primary components, such as pneumatic components made by Festo/SMC/Janatics and electrical and electronic components made by Bonfiglioli/Motovario/Rotomotive, such as AC motors, MCBs, and relays Technical Specifications: Model: HMPL–SAVC Product Samples: Round/Flat Glass/PET Bottles/Jars Output Speed: Up to 20 Jars/Minute (Speed depends on operator & manual loading-unloading) Cleaning System: Air Clean Working Height: 875 ± 50 mm Adjustable Power Supply: Single Phase / 230 V AC / 50 Hz Air Consumption: 5 CFM 4 to 6 Kg/Cm² (As per requirements) Air Filter: 5 microns with auto drain Mist Separator: 0.3 microns with auto drain Ionized Air: High flow rate ionized air nozzle Net Weight Approx.: 150 Kg Dimensions Approx.: 580 mm L x 580 mm W x 850 ± 50 mm (H) Change Parts: Bottle Holder https://harikrushna.com/product/semi-automatic-air-jet-vacuum-cleaning-machine/ https://www.youtube.com/watch?v=_yjz-t4NOFQ

Design Features 1. Ductile iron fully lined casing provides durability, strength and long service life. 2. Multi-stage high pressure operation to 750 psi. 3. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. 4. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. 5. Large, open internal passages designed to maximize wear life and lower operating costs. 6. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life. 7. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Tobee® THH3/2D slurry pumps are designed for handling highly abrasive, high density slurries in metallurgy industry, mining industry, coal, power, chemical, building material and other industrial departments. The pumps of these models also can be installed as multi-stage series. FAQ: 1.Q:Are you a factory or trading company? A:We are a big manufacturing pump factory with 30 years experience? 2.Q:Where is your factory located? How can I visit there? A:Our factory is located in Shijiazhuang City, Hebei Province, China.You can fly to Shijiazhuang airport directly.All our clients, from home or abroad, are warmly welcome to visit us! 3.Q:What is The material of your pumps? A: The materials can be selected by High chrome alloy or Rubber,Polyurethane,Cast iron,SS304,SS316,CD4MCu,Duplex SS,Bronze etc. We can also choose material as customers’ requirement. 4.Q:How can I get some samples? A: We are honored to offer you samples. 5.Q:How does your factory do regarding quality control? A:"Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has 15~20QC. Email: Sales3@tobeepump.com Mob: +86-17632062190 Skype: Tobee.Pump Web: www.tobeepump.com Web: www.slurrypumpsupply.com Web: www.tobee.cc Web: www.tobee.store

Automatic high-speed rotary ampoule washing machines OR: automatic high-speed rotary vial washing machines made to wash ampoules and vials with minimal contact with machine parts in the pharmaceutical, veterinary, and biotech industries. With the help of interchangeable parts, this machine can wash various sizes of ampoules and vials quickly. Automatic high-speed rotary ampoule washing machines have a specially designed gripper system that holds the ampoule or vial from the neck and inverts it until the washing operation is complete. After washing, place the ampoule or vial in a vertical position on the out-feed feed screw system to ensure a positive wash ampoule or vial. Salient Features: 1) The machine is manufactured or developed as per GMP standards. 2) The structure is made of SS 304. 3) The contact parts are made of SS 316. 4) Rigid, vibration-free construction for trouble-free performance 5) An extra set of spare parts is included with the machine. 6) The stainless steel cabinet and polycarbonate glass doors protect the machine. 7) The washing section is covered with a polycarbonate cabinet for easy cleaning. 8) This machine is simple to operate. 9) All exposed parts are made of SS 304, electroless nickel plated, or brass for a long, corrosion-free life. 10) The nozzles enter into the ampoules' or vials' mouths during the washing operation, ensuring penetration of the washing media to the core and a perfect washing principle. 11) Similarly, fixed-top nozzles ensure external and internal washing of ampoules and vials. 12) We can customize the washing sequence to meet the customer's needs. 13) Machine with the drainage system. 14) A solenoid valve for use with wash media on its own. 15) There are two centrifugal pumps. 16) Two nos. of SS tanks 17) One of each for DM water and recirculation water. The loop connection provides direct access to WFI water and compressed air. 18) Four nos. of glycerin-filled pressure gauges. 19) Four nos. of SS 316 filter housing for code-7 with its nylon cartridges 20) Given an emergency switch on both ends (in-feed and out-feed). Washing Cycles: 1st Wash: Re-circulated Water 2nd Wash: Compressed Air 3rd Wash: DM Water 4th Wash: Compressed Air 5th Wash: WFI Water 6th Wash: Compressed Air **External Washes** : **Washing Media** 1st Wash: Re-circulated Water 6th Wash: Compressed Air Technical Specification: Model: HMPL–RVW–120 Ampoule Machine or Vial Machine Volume: 1 ml to 20 ml Ampoules / 2 ml to 30 ml Vials Output Speed: 120 Ampoules / Vials Per Minute The direction of movement: Left to Right Working Height: 900 ± 50 mm Adjustable Power Supply: 3 Phase + Neutral + Earthing / 415 V AC / 50 Hz Wash Cycle: Six inner + Two Outer wash Net Weight: 1750 Kg (Approx.) Dimensions: 2050 mm (L) x 2000 mm (W) x 1210 mm (H) approx. Model: HMPL–RVW-240 Ampoule Machine or Vial Machine Volume: 1 ml to 20 ml Ampoules / 2 ml to 30 ml Vials Output Speed: 240 Ampoules / Vials Per Minute (Speed Depends upon Product Size) The direction of movement: Left to Right Working Height: 900 ± 50 mm Adjustable Power Supply: 3 Phase + Neutral + Earthing / 415 V AC / 50 Hz Wash Cycle: Six inner + Two Outer wash Net Weight: 1800 Kg (Approx.) Dimensions: 2250 mm (L) x 2250 mm (W) x 1450 mm (H) approx. Utility Required: 1) Power: 3 Phase + N + E, 5 Core, 50 Hz (as per requirements). A total of 5 HP are required. 2) Air: Compressed Filter Air 30 CFM 3) Water: Purified Water: 400 Liters/Hour WFI Water: 120 Liters/Hour https://harikrushna.com/product/automatic-rotary-ampoule-vial-washing-machine/ https://www.youtube.com/watch?v=eOtGf5aVeRQ&t=43s

"ABIKIRAN ADDS is a team of dynamic advertising professionals with more than 20 years of experience in the field of Outdoor Advertising. We have a prestigious presence in Chennai and All Over Tamilnadu. We are equipped with the requisite knowledge, skills and tools to offer you results giving publicity solutions. We offer complete range of advertising services need for your advertising and business promotion. We do our jobs with a passion and it shows in the quality of our services. Founded in 2019, Abikiran Media Group Is One Of The Largest Comprehensive Marketing Communications Group In India functioning primarily in Outdoor, Events and Digital ecosystem. It is currently emplacing over 20 Professionals Across 3 Offices."

The automatic linear vial washing machine consists of the main structure, covered with SS cabinet safety acrylic doors (optional), an in-feed turntable, washing nozzles, an out-feed conveyor, pumps with the tank, filter housing and cartridges, pneumatic components, motors, and gearboxes, and an electrical panel with an AC drive, a PLC, and an HMI (optional). Salient Features: 1) The linear vial washing machine is compact and versatile, made as per GMP norms. 2) The structure is made of MS and SS304 3) The contact parts are made of stainless steel 316L. 4) Rigid, vibration-free construction for trouble-free performance 5) The washing section is covered with an acrylic cabinet, which is easy to clean. 6) Simple machine to operate 7) All exposed parts are made from SS 304, hard chrome plated, or brass for a long, corrosion-free life. 8) The six sets of nozzles enter the vial's mouth during the washing operation, ensuring penetration of the washing media to the core and a perfect washing principle. 9) Fixed top nozzles in each washing station ensure external washing of vials simultaneously with internal washing. 10) The flow of washing media stops during the chain index and saves 25% on utilities. 11) The system of solenoid valves and optional tanks, pumps, and filters is engineered for long, trouble-free life and foolproof operation. 12) Four inner wash (Including one air wash, two inner wash with recycled tray) & one outer wash Technical Specifications: Model: HMPL - LVW 1) Vial Size: 2 ml to 30 ml Round Glass Vials 2) Output Speed: 60 to 200 Vials/Minute (Speed depend on product size) 3) Working Height: 875 ± 50MM Adjustable 4) Power Consumption: 1.5HP Main Machine/ 2.25HP Pumping Station/ 0.25HP Loading Platform) 5) Power Supply: 3 Phase + Neutral + Earthing / 415 V AC / 50Hz 6) Air Consumption: 5 CFM 7) Air Supply: 4 to 6 Kg/Cm2 8) Net Weight: 600 Kg Approx 9) Dimensions (L x H x W): 3265mm (L) x 1835 mm (W) x 850mm (H) approx. 10) Wash Cycle: 7 Wash 11) Change Parts: In-feed Screw, In-feed Inverter, In-feed Start Wheel Out-feed Screw, Out-feed Inverter, Out-feed Star Wheel https://harikrushna.com/product/automatic-linear-vial-washing-machine/ https://www.youtube.com/watch?v=ELDj8881OWc

The automatic linear tunnel-type bottle washing machine consists of the main structure, bottle holding pocket, in-feed tray, out-feed wire mesh conveyor (optional), washing nozzle, PLC and HMI, electrical panel, motor, pumps with a tank, and AC drives. Salient Features: 1) The linear tunnel-type washing machine is manufactured or developed in accordance with GMP standards. 2) The structure of a linear tunnel-type washing machine made of MS cladding with SS 304 and Argon welding. 3) SS tanks and trays made from SS 316 are argon welded with round corners. 4) A mono-block SS pump made of SS 316 with a mechanical seal. 5) Stainless steel filter housing made of SS 316. 6) All nozzles are made from SS 316. 7) Imported gear motor for main drive and conveyor 8) AC variable drives for the main drive and conveyor. 9) Pumps with tank (60 liters each): 2 nos. 10) Pumps are provided in the machine, which gives full pressure to wash bottles properly. 11) Low RPM and maximum output. 12) No additional parts are required to wash 30 ml to 500 ml (if the neck diameter is the same). 13) All parts coming into contact with washing zones or jets are made from SS 316. 14) A special pocket system ensures easy and trouble-free washing of bottles on the outer and inner sides. 15) The machine is also equipped for the external washing of bottles. 16) Water recycling arrangements are possible as per the client's requirements. 17) An indexing motion makes it easier for syringes to move inside bottles. 18) A clutch device is available for stopping the machine in the event the vials or bottles are overturned or have an excessive diameter. 19) The machine is equipped with safety devices to ensure smooth and silent operation with high-rated output. Technical Specifications: Model #1 HMPL–LTBW–120 1) MOC & Type of Bottle: PET/GLASS Round/Flat Bottles (with the help of change parts) 2) Volume of Bottles: 30 ml to 250 ml 3) Output Speed: Up to 120 Bottles/Minute 4) No. of pockets: 10 5) Working Height: 875 ± 50 mm Adjustable 6) Electrical Power Supply: Main Motor: 1 HP, 415 V AC, 50 Hz Heater: 3 KW Conveyor: 0.5HP / 415 V AC / 50 Hz 7) Tank Capacity: SS 316 60 Liter 8) Wash Cycle: 3 Inner + 1 Outer + 1 Air 9) Cycle Time: 3.5 Second for each wash + 1.5 Second for travelling 10) Water Consumption: 400 Liters / Hour / Cycle 11) Air Consumption: 2.5 Kg/cm² / 20 CFM 12) Net Weight: 1400 kg (approx.) 13) Dimensions: 1150 mm (L) x 3000 mm (W) x 2000 mm (H) approx. 14) Change Parts: Bottle Holding Pocket Model #2 HMPL–LTBW–240 1) MOC & Type of Bottle: PET/GLASS Round/Flat Bottles (with the help of change parts) 2) Volume of Bottles: 30 ml to 250 ml 3) Output Speed: Up to 240 Bottles/Minute 4) No. of pockets: 20 5) Working Height: 875 ± 50 mm Adjustable 6) Electrical Power Supply: Main Motor: 1 HP, 415 V AC, 50 Hz Heater: 3 KW Conveyor: 0.5HP / 415 V AC / 50 Hz 7) Tank Capacity: SS 316 60 Liter 8) Wash Cycle: 3 Inner + 1 Outer + 1 Air 9) Cycle Time: 3.5 Second for each wash + 1.5 Second for travelling 10) Water Consumption: 400 Liters / Hour / Cycle 11) Air Consumption: 2.5 Kg/cm² / 20 CFM 12) Net Weight: 2400 kg (approx.) 13) Dimensions: 2900 mm (L) x 2500 mm (W) x 1130 mm (H) approx. 14) Change Parts: Bottle Holding Pocket https://harikrushna.com/product/automatic-linear-tunnel-type-bottle-washing-machine/ https://www.youtube.com/watch?v=oLKIiK5j5ag

Best SAP FICO S4HANA Training in Hyderabad, SR Nagar: Chanu SK SAP FICO S4HANA Training Institute is the Best SAP FICO/S4HANA Training Institute in Hyderabad, SR Nagar where many of our students have got trained and placed. https://www.chanusk.in/best-sap-fico-s4hana-training-in-hyderabad/

The Rotary Bottle Washing Machine consists of the main structure, rotary platform, bottle holders, flow regulators, pressure meter, solenoid valve, Geneva mechanism, two SS tanks with pump and nozzle, electrical panel, and AC motor. Salient Features: 1) The rotary bottle washer is compact and versatile per GMP norms. 2) The structure is made of MS and SS304. 3) Rigid, vibration-free construction for trouble-free performance 4) The contact parts, such as the rotary washing nozzle, rotary washing pump impeller, tanks, and cup/bottle holder plate, are made of stainless steel 304. 5) By removing the top cover, the machine's base is easily cleaned. 6) The tanks' capacity is 75 liters each. 7) Specially designed SS 304 impeller-based AC motors for pumps 8) Pumps and tanks are mounted on a portable stand for easy maintenance and cleaning. 9) Increased centrifugal pump capacity to wash larger bottles (500 mL and 1000 mL). 10) Fixed nozzles to prevent contamination of the water cycle 11) A specially designed Geneva Mechanism 12) Four inner wash (Including one air wash, two inner wash with recycled tray) & one outer wash 13) Simple loading, unloading, and use 14) Individual solenoid valves are used for each wash, which eliminates the carbon plate and other accessories to avoid leakages and minimize the maintenance ratio. 15) Individual flow regulating valves to control the flow of water 16) Bottle guide systems, particularly for lightweight bottles. 17) Use a separate panel control to avoid short circuits caused by water spraying. 18) SS glycerin fill pressure meter. Technical Specification: Model: HMPL–RBW–64 / 96 1) 15 mm Ø to 70 mm Ø Height: 50 mm to 270 mm Neck Ø: 21 mm to 25mm 2) Output Speed: 3600 to 7200 Bottles / Hour (Speed Depends on Products Size) 3) Working Height: 875 ± 50 mm Adjustable 4) Power Consumption: 5.0KW (Main Motor: 0.5HP, Pump: 1HPX2 & Heater: 3KW) 5) Power Supply: 3 Phase / 440V AC/ 50Hz 6) Air Consumption: 5 CFM 7) Air Supply: 4 to 6 kg/cm2 8) Net Weight Approx.: 450 Kg 9) Dimensions Approx.: 1600mm (L)x 1300mm (W)x 1300 mm(H) 10) Direction: Clockwise 11) Number of Cup Holders: 64 / 96 12) Wash Cycle: 4 Inner + 1 Oute 13) Tank Capacity: 75 Litres (2 nos) Consumption of Water: 1) First Wash: 200 Liters/Hour to 230 Liters/Hour 2) Second Wash: No consumption as such, water loss during re-circulation shall be compensated 3) Third Wash: 200 Liters/Hour to 230 Liters/Hour 4) Fourth Wash: No consumption as such, water loss during re-circulation shall be compensated OR Air Wash 5) Outside Wash: 200 Liters/Hour to 230 Liters/Hour https://harikrushna.com/product/rotary-bottle-washing-machine/ https://www.youtube.com/watch?v=nmlnifLHpL4

The high-speed linear bottle washer is used in the pharmaceutical, food, and beverage industries and is best suited for round or flat bottles. The automatic loading arrangement facilities use a feed conveyor to load bottles onto a turntable or a pushing device to push bottles, which saves manual work because bottles are fed into pockets automatically. The automatic unloading mechanism consists of unloading the bottle to continue to the turntable (optional). Salient Features: 1) The machine is built or developed following GMP standards. 2) The structure is made of MS clad with SS 304, including the frame. 3) Rigid, vibration-free construction for trouble-free performance 4) High-pressure spray nozzles ensure the perfect wash of bottles. 5) Interchangeable wash sequences 6) With the help of interchangeable parts, the machine can handle round and flat glass bottles. 7) All parts coming into contact with washing zones or jets are made from SS 316L materials. 8) Pumps and tanks are mounted on a portable stand for easy maintenance and cleaning. 9) Water recycling arrangements are possible as per the customer's needs. 10) A large-capacity centrifugal pump for cleaning larger containers 11) A third tank and pump can be fitted (optional). 12) The most important and well-known pneumatic components are Festo/SMC/Janatics, Bonfiglioli/Motovario/Rotomotive for AC motors, Delta for AC drives, and MCB and relay CE for electrical and electronic components. Technical Specifications: Model: HMPL–WAVC 1) Bottle Type & MOC: Round Glass/PET Bottles 2) Bottle Size: 15 mm Ø to 70 mm Ø Height: 50 mm to 270 mm Neck Ø: 21 mm to 25 mm 3) No. of Row: 10 4) Output Speed: Up to 150 Bottles/Minute 5) Tank Capacity: 45 Liters of SS 316 L (2 Nos) 6) Wash Cycle: 1st Inner Water Wash + 2nd Outer & Inner Water Wash + outer Air & Inner Air +Vacuum Cleaning 7) Cycle Timing: 1 Second for each wash + 1.5 seconds for travelling 8) Water Consumption: 500 Liters / Hour 9) Working Hight: 875 ± 50 mm Adjustable 10) Electrical Specification: Semi Servo Motor, 1 HP, 415 Volts, 50 Hz, with Backless Gearbox Pump Two Nos. 1 HP x 3 = 3 HP; 415 volts; 50 Hz Conveyor 0.5 HP / 415 Volts / 50 Hz 11) Air Consumption: 5 CFM 4 to 6 Kg/Cm2 (As per customer needs) 12) Net Weight: 550 kg (approx. 13) Dimensions: 2770 mm L x 1230 mm W x 1300 mm H (approx. 14) Change Parts: Bottle Rack & Turn Table Guide Set https://harikrushna.com/product/combi-airjet-water-washing-machine/

The automatic air-jet vacuum cleaning machine consists of the main structure, product in-feed screw, in-feed star plate, pneumatic component, washing nozzles, electrical panel, AC drive, and motor. Salient Features: 1) The unit is compact and versatile as per GMP norms. 2) The structure is made of MS and SS304. 3) Rigid, vibration-free construction for trouble-free performance. 4) Contact parts are made of SS 316. 5) Use two nozzles for cleaning bottles. 6) Constructed of 10-mm-thick aluminum plate clad in SS-304. 7) Bearing support for the rotating disc for long life. 8) Alter parts as needed for different bottles. i.e., an in-feed star plate and an in-feed screw. 9) The machine is used for various sizes (diameters) of products. 10) User-friendly, requiring less maintenance. 11) Automatic in-feed and out-feed of bottles 12) The well-proven components, such as Festo and SMC pneumatics; the electrical or electronic components, such as Bonfiglioli/Motovario AC motors, MCBs, and "CE" relays. Technical Specifications: Model: HMPL-AVC 1) Bottle Size (Ø): 25mm Ø to 90mm Ø 2) Output Speed: 60 to 150 Bottles/Minute 3) Cleaning Type: Intermittent Linear Type 4) Working Height: 875 ± 50 mm 5) Power Supply: Three Phase/440V AC/ 50Hz 6) Air Consumption: 5 CFM (Costumer Scope) 7) Net Weight: 400 kg approx. 8) Dimensions (LXWXH): 2575 mm (L) x 650 mm (W) x 985 mm (H) approx. https://harikrushna.com/product/automatic-air-jet-vacuum-cleaning-machine/ https://www.youtube.com/watch?v=mMRef1Z1uMg

The semi-automatic timer filling machine consists of the main structure of SS, product holders, a 100-liter tank with a stirrer, a level controller, a filling pump, a filling nozzle, auto and manual modes, a pedal switch, and an AC drive. Salient Features: 1) The machine is built or developed following GMP standards. 2) The structure is made of SS 304 with a matte finish. 3) The pump, nozzle, tank, and valve are all made from SS 316. 4) Rigid, vibration-free construction for trouble-free performance. 5) Use of food-grade PVC breaded for the flow of liquid. 6) Each filling head can work independently. 7) Unique bottle and nozzle-holding device 8) The storage tank has a stirrer, a level controller, an auto inlet valve, and an overflow connection. 9) The machine includes an easy-to-clean built-in storage tank. 10) The drain valve is below the filling tank for flushing purposes. 11) Drain the tray around the machine platform. 12) A filling pump is used to suck the fill material from the storage tank to the nozzle end very quickly and cleanly. The same function is available for individual pumps. 13) Easily adjustable for various filling volumes 14) Machine has electronic components such as an AC Drive, speed port switch, and timer in place of mechanical parts such as a syringe, Teflon seal rod etc. 15) Digitally controlled settings 16) Three-phase power requirement 17) Very high fill accuracy of ± 1 % with water. 18) Different fill volumes or bottles do not necessitate the different parts. 19) A VFD controlled the liquid flow. 20) User-friendly and high scalability 21) No Bottle, No Filling Special Features: 1) Prime with variable speed capability. 2) Each pump has an individual prime facility. 3) Pump starts with a preset timer in auto mode. 4) Set up a timed facility to dispense different volumes. 5) A facility with a set speed to dispense different viscosity products (feature for the foamy product). 6) Adjustable filling nozzle with the horizontal and vertical movement for products of various diameters and heights, as well as an adjustable product guide 7) An anti-shutoff valve to avoid dripping. Technical Specifications: Model: HMPL-STF-TT-1 1) Suitable For: 50 ml to 5000 ml 2) Output/minute: 10 to 15 bottles (Water) (Depending upon volume, the viscosity of Liquid & manual loading and unloading) 3) Filling Capacity: 50 ml onward 4) Pump Capacity: Depends on the viscosity of the product and volume. 5) Power Supply: Three Phase / 440 V AC / 50Hz 6) Air Consumption: 4 to 6 Kg/Cm², 5 CFM 7) Net Weight: 75 kg approx. Model: HMPL-STF-TT-2 1) Suitable For: 50 ml to 5000 ml 2) Output/minute: 20 to 25 water bottles (Depending upon volume, the viscosity of Liquid and manual loading-unloading) 3) Filling Capacity: 50 ml onward 4) Pump Capacity: Depends on the viscosity of the product and volume. 5) Power Supply: Three Phase / 440 V AC / 50Hz 6) Air Consumption: 4 to 6 Kg/Cm², 5 CFM 7) Net Weight: 150 kg approx. https://harikrushna.com/product/semi-automatic-timer-filling-machine/ https://www.youtube.com/watch?v=rwlUsFR7TEU

The semi-automatic peristaltic filling machine consists of the following components: a SS main structure, filling pump, bottle and nozzle holding device, filling nozzle, foot switch, feather touch HMI control, motor, and electrical panel. Salient Features: 1) The peristaltic filling machine is manufactured or developed following GMP standards. 2) The entire structure is made of stainless steel with a 304 matte finish. 3) Rigid, vibration-free construction for trouble-free performance 4) Use of pharmaceutical or food-grade silicon tubes for the flow of liquid 5) ON/OFF switch with integrated AC input indicator. 6) Microcontroller-based control circuits 7) Precise PWM-based DC stepper motor drive 8) HMI shows volume, RPM, calibration, fill timing, and dispensing. 9) The HMI can control time, volume, ON/OFF, and speed. 10) Auto-stop after set volume finished 11) Provision for external (auto) ON control using a footswitch or from the HMI. Technical Specifications: Model: HMPL–SPRF-TT 1) Number of Heads: Single / Double 2) Speed: 1 to 150 RPM 3) Filling Volume: 2 ml to 200 ml 4) Flow Rate: 0.1 to 570 ml / Minute 5) Tubing: 7.9 mm ID with 1.6 mm Wall Thickness 6) Set Volume: 0 to 9999 ml 7) Interval Time: 0 to 99.9 Seconds 8) Rotor: SS 304 9) Rollers: Carbon Filled Nylon 10) Enclosure: Stainless Steel 11) Motor: Stepper Motor 12) Pressure: Up to 2.5 Kg / Cm² 13) Accuracy: ± 1 % 14) Power Supply: Single Phase / 230 V AC / 50 Hz 15) Net Weight: 5 kg approx. https://harikrushna.com/product/semi-automatic-peristaltic-filling-machine-table-top/ https://www.youtube.com/watch?v=kEQUYMkJVm0

The semi-automatic piston filling machine consists of the main structure, filling nozzle, hopper, pneumatic cylinder, pedal switch, and mains ON/OFF. Salient Features: 1) The piston filling machine is manufactured or developed following GMP standards. 2) The structure is made of SS 304 with a matte finish. 3) The contact parts are made of SS 316. 4) Rigid, vibration-free construction for trouble-free performance. 5) The machine is run with air where an electric supply is not required. 6) The unit is controlled by compressed air. 7) Different filling volumes or products do not necessitate the different parts. 8) Specially designed pneumatic cylinder-operated nozzle with a plunger to avoid dripping. 9) The machine is used for filling various sizes of products. 10) Use the emergency on/off switch to prevent an accident. 11) User-friendliness and scalability 12) Simple screw adjustment and cleaning. 13) All pneumatic connections FESTO, SMC, and Janatics make. 14) Operation in both Auto and Manual Modes 15) A 20-Kg SS-316 single-wall hopper. Technical Specifications: Model: HMPL–SPF 1) Filling Volume: 50 - 500 ml 2) Filling Accuracy: ± 1 to 1.5% of Filling Weight 3) Speed (BPM): 10 to 15 Products/Minute (Depending on the viscosity of the material & manual loading) 4) Air Pressure: 5 to 8 Kg/cm² 5) Air Consumption: 50 L/Min 6) Net Weight: 28 Kg 7) Dimensions (L x W x H )mm: 1080 x 320 x 410 https://harikrushna.com/product/semi-automatic-piston-filling-machine-table-top/ https://www.youtube.com/watch?v=jgmIJsxriOU

The Semi-Automatic Volumetric Liquid Filling Machine—Table Top consists of the main structure, product holding mechanism, nozzles and syringes, electrical panel, motor, and mains ON/OFF. Salient Features: 1) The machine is manufactured or developed following GMP standards. 2) The structure is made of MS clad with SS 304. 3) Rigid, vibration-free construction for trouble-free performance. 4) Elegantly matte-finished SS 304 bodies 5) All contact parts are made from SS 316. 6) Reciprocate the filling nozzle with the self-centring device to avoid foaming. 7) The pharma- and food-grade PVC-breading tubes are used for the filling. 8) Minimum change over time from one size to another bottle or fill size 9) SS measurement scale for filling volume adjustment. 10) Filling precision of 1% in a single dose 11) The flow of liquid can change as per requirements. 12) One-of-a-kind tabletop machine Technical Specification: Model: HMPL-VLF-2 1) Bottle size (Ø): 15 mm Ø to 90 mm Ø 2) Output speed: 20 to 25 Bottles/Minute (Depending on the viscosity of liquid and manual loading & unloading) 3) Number of Heads or Syringes: 2 No. 4) Fill Size: 10 ml to 1000 ml Round Glass/PET Bottles (With Required Change Parts) 5) Power Supply: Single Phase / 230 V AC / 50 Hz 6) Net Weight Approx.: 75 Kg 7) Dimensions: Table Top https://harikrushna.com/product/semi-automatic-volumetric-liquid-filling-machine-table-top/ https://www.youtube.com/watch?v=jBmfqiwi2L8

Sale Leads