Sale Leads

Tobee® Slurry Pump Rubber Frame Plate Liner is the main wear parts for the rubber lined slurry pump. It forms a pump chamber with cover plate liner and throat bush to contact with slurries, As one of main wetted parts, Frame plate liner very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber materials selection for most all duties in mill. Tobee® Slurry Pump Rubber Wear Parts: √ Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints. √ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. √ Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. Tobee® Applications of Rubber Slurry Pumps: Tobee® Slurry Pump Rubber Parts are widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet Crushers, SAG Mill Discharge, Fine Primary Mill Grinding, Tailings, Secondary Grinding, Bottom/fly ash slurries, Pulp And Paper, Food Processing, Cracking Operations, Gypsum Slurries, Pipeline Transport, High Velocity Hydraulic Transport, Food Processing, Explosive Sludge In Metal Smelting, River And Pond Dredging, Heavy Refuse Removal, Larger Particle Or Low NPSHA Applications, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash Down, Floor Drainage, Mixing, Iron Ore, Cooper, Diamond, Aluminum oxide, Gold, Kaolin, Phosphorite, Steel, Palm, Sugar, Chemical, Power, FGD, Frac Sand Blending, Waste water, FlotationContact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® 4/3 D AH Slurry Pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy. It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry. Tobee® 4/3 D AH Slurry Pump Design Features: • Horizontal,Cantilevered,Centrifugal,Single stage slurry pump design. • Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. • Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. • Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable. • Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer • Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. • Shaft seal - Packing seal,Centrifugal seal,Mechanical seal; • Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc. • The discharge branch can be oriented to any eight positions at the interval of 45 degrees; • Easy to install and maintain in on-site application. Tobee® 4/3 D AH Slurry Pumps Applications: The 4/3 D AH Slurry pumps are widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry. √ Mining & Mineral Processing (Gold/Copper/Iron Ore/Lead & Zinc/Tin/Wolfram etc.) √ Environmental Water & Sewage Treatment √ Power & Oil (Bottom ash, lime slurry for FGD) √ Chemical Industry (Phosphate/Potash/Chemical Fertilizer etc.) √ Food and Other Industry (Sugar/Paper & Pulp/Tobacco) √ Dredging (Sand & Gravel) Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Upgrade your office space with our exclusive furniture shop sale, featuring high-quality office chairs at incredibly affordable prices. Our range of office chairs combines comfort, functionality, and stylish designs to enhance your productivity and create a professional atmosphere. With prices starting at a mere fraction of the usual cost, this sale is an opportunity you don't want to miss!

Welcome to our furniture shop in Bilaspur, Chhattisgarh! We offer custom-made almirahs, interior design services, steel jhulas, comfortable beds, sofa sets, office chairs, wardrobes, dressing tables, and divans. Our team is committed to exceptional service, helping you find the perfect pieces for your home or office. With modern and classic designs, we cater to various tastes and budgets. Visit our Bilaspur store and let us transform your space with our high-quality and affordable furniture selections.

Welcome to PADARIYA INTERNATIONAL LTD, Our PIPL company Is a Leading people centric, Multi category Consumer goods business Dedicate to simulating the sense of adult consumer worldwide, our portfolio reflect to our Commitment to meeting the evolving and varied needs of today's, Padariya International Ltd Is Leading Excellent Quality Manufacturer & Exporter of Tobacco leaves and various Tobacco products in global market, where we take pride in offering premium quality tobacco Leaf’s to our valued customers. With years of experience in the industry, we have established ourselves as a Trusted, reputable, supplier of tobacco leaves to various regions around the world. Our commitment to quality, reliability, and customer satisfaction has made us a preferred choice for businesses looking for top-quality tobacco leaves, At our PIPL company, we source the finest tobacco leaves from the best tobacco-growing regions around the India and world. We work closely with our farmers and growers to ensure that our products are grown and harvested using sustainable farming practices, our team of experts carefully selects and inspects every leaf, our tobacco leaves are then carefully cured and processed to maintain their quality and flavor. Our company is committed to providing the best quality tobacco leaves to our customers. We understand the importance of timely delivery, and we take pride in our ability to deliver our products on time, every time. Our reliable logistics network enables us to deliver our products to any corner of the world, making us the go-to choose for businesses looking for a reliable tobacco leaves exporter. and we work closely with our clients to ensure that their needs are met. So, whether you're looking for high-quality tobacco leaves for cigarettes, cigars, or other tobacco products, we've got you covered. Contact us today to learn more about our products and services and let us help you take your business to the next level. Thanks…

The Expeller EM028HS1 is used on 10/8 E-M Slurry Pump, It's one of the important parts of the slurry pump, and be combined with the decompression cover to form the dynamic seal of the slurry pump. It is one of the three types of shaft seals of the slurry pump. Below we will briefly introduce the expeller of the slurry pump: The standard material of the expeller of the slurry pump is generally gray iron or ductile iron, and it can also be made of A05 and A05A as the flow-through part material according to customer requirements. In recent years, most customers prefer AO5 high-chromium wear-resistant alloy material when purchasing. The expeller can not only play a role in sealing, but also play a role in reducing the axial force. If the slurry pump expeller is installed, the direction of the pressure differential force acting on the expeller by the liquid is opposite to the pressure differential force acting on the slurry pump impeller, so that part of the axial force can be offset and the bearing life will be prolonged.

Tobee® slurry pump parts are dimensionally interchangeable with warman slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially abrasion and corrosion pump parts. Tobee own foundry and compound specialist to increase the wet parts wear life time, and We have been tested by end users plant of the most abrasive and most corrosive arduously applications. and also welcome the opportunity to discuss your applications in more detail. Our experienced technical engineers are always ready to give advice and make suggestions to improve future wear life of your slurry pumps. We are capable enough to help you work out a perfect casting material ingredient for special slurries.

Tobee® Slurry Pump Spare Parts China are interchangeable with AH/HH/L/M slurry pump parts and designed by spatial structure CFD and impeller casting CAE, Precision casting and professional heat treatment process make the parts up to more higher hardness, Precision machining and painting technology ensure the parts are more conformable with fluidics, With strict quality control, Tobee's high chrome wear parts provide users with longer 30%-60% wear life and higher efficiency due to advanced manufacturing processes. Increasing users enjoy perfect fit and finish to reduce installation workload.Tobee® slurry pump parts are dimensionally interchangeable with warman slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially abrasion and corrosion pump parts. Tobee own foundry and compound specialist to increase the wet parts wear life time, and We have been tested by end users plant of the most abrasive and most corrosive arduously applications. and also welcome the opportunity to discuss your applications in more detail. Our experienced technical engineers are always ready to give advice and make suggestions to improve future wear life of your slurry pumps. We are capable enough to help you work out a perfect casting material ingredient for special slurries. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® F029HS1A05 Slurry Pump Expeller Ring is an important Hi-seal wearing spares of Slurry Pump, Slurry Pump High Seal Parts mainly included: expeller, expeller ring, frame plate liner insert and stuffing box,there will be HS1 after the basic part numbers to represent Hi-seal pump parts, and compare with standard pump parts, the HS1 slurry pump parts are more suitable for sealing at high intake pressures as the large diameter slurry pump expeller. Slurry Pump Spare Parts 029 Expeller Ring: Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints. Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® Slurry Pump Shaft Sleeve is also a quick - wear part of slurry pumps. The design and material of shaft sleeve is significant to slurry pump service life, The slurry pump shaft sleeve protects pump shaft from abrasion and corrosion within seal arrangements, Tobee offers different materials of shaft sleeve for international brand slurry pumps. The Shaft Sleeve spare part code is 075 and 076. We have a slurry pump shaft sleeve in material 4Cr13, Ceramic coated, tungsten carbide coated and stainless steel, to meet different applications. The slurry pump shaft sleeve protects the pump shaft from slurry abrasion and corrosion, enhancing the pump lifetime. The slurry Pump Shaft Sleeve is also a quick-wear part of slurry pumps. The design and material of the shaft sleeve are significant to slurry pump service life, The slurry pump shaft sleeve protects the pump shaft from abrasion and corrosion within seal arrangements, Tobee offers different materials of shaft sleeve for international brand slurry pumps. A shaft sleeve acts as a shield for the shaft assembly in pumps and compressors. A shaft sleeve is a hollow metal tube, cylindrical in shape, which is mounted over a shaft and shaft assembly to protect it in a corrosive environment. Shaft sleeves are commonly found in single-stage pumps. The pump shaft usually offers protection from corrosion and erosion. The basic function of a shaft sleeve is to protect the shaft from packing wear at the stuffing box. Shaft Sleeves help protect the running surface of the shaft seal or the surfaces in contact from damage or abrasive wear. The hardness of the material used to construct the shaft must be sufficient; Otherwise, it may cause a shaft sleeve to fail. The thermal expansion coefficient must be considered when designing a shaft sleeve. In ideal conditions, the shaft's coefficient of thermal expansion should be equal to that of the shaft sleeve. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® Expeller DAM028A05 is hi-seal wearing parts used for 6/4D-AH Slurry Pumps. And its main point is reduce centrifugal force and help seal slurry pump. The Hi-seal EXPELLER 028 Slurry Pump Spare Parts is an important part of the expeller seal. The expeller fluid dynamic seal refers to the installation of an open impeller in the opposite direction of the coaxial direction near the back of the impeller rear cover of the pump. When the pump is working, the expeller rotates with the pump spindle, and the liquid in the expeller rotates together. The rotating liquid creates an outward centrifugal force that resists the liquid flowing to the mechanical seal and reduces the mechanical seal. pressure. On the other hand, the solid particles in the medium are prevented from entering the friction pair of the mechanical seal, which reduces the wear of the mechanical seal block and prolongs its service life. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® Slurry Pump Shaft Sleeve - wear part of slurry pumps. The design and material of shaft sleeve is significant to slurry pump servicelife, The slurry pump shaft sleeve protects pump shaft from abrasion and corrosion within seal arrangements, Tobee offers different materials of shaft sleeve for international brand pumps. Shaft Sleeve Specifications: Materials: 3Cr13, 4Cr13, Stainless steel, Ceramic etc Part code: 075, 076 Replaced model: Tobee TH(R), THH, TL(R), TG(H), TP(R), TF. Warman AH(R), HH, L(R), G(H), SP(R), AF etc Shaft Sleeves B075, C075, D075, E075, F075, FAM075, SH075, TH075, TH076 for 1.5/1B-AH, 2/1.5B-AH, 3/2C-AH, 4/3C-AH, 4/3D-AH, 6/4D-AH, 6/4E-AH, 8/6E-AH, 8/6R-AH, 8/6F-AH, 10/8F-AH, 12/10F-AH, 14/12F-AH, 10/8ST-AH, 12/10ST-AH, 14/12ST-AH, 16/14TU-AH, 16/14TU-AH slurry pumps. Tobee® manufactures quality High chrome slurry pump parts, Rubber slurry pump parts, Polyurethane slurry pump parts and Ceramic slurry pump parts fully compatible with Standard AH® slurry pumps, and provides value to customers through fair pricing and lead times that are some of the lowest in the market. Tobee® stocks millions of dollars of slurry pump parts globally, all of which are interchangeable with AH® slurry pump parts. We maintain a global distribution network that stands ready to serve your process needs. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® G118-1-K31 Lantern Restrictor Interchangeable Spare Parts to 16/14ST-AH Centrifugal Slurry Pump.Tobee® Slurry pump lantern restrictor is one of shaft seal parts in full flow gland seal slurry pump where the flushing water is injected through, is located between slurry pump impeller and packing ring, it works as a lantern ring, but requires more flushing water. Tobee® Slurry pump lantern restrictors are widely used on slurry pumps 1.5/1B-AH, 1.5/1C-HH, 2/1.5B-AH, 3/2C-AH, 4/3C-AH, 4/3D-AH, 4/3E-HH, 6/4D-AH, 6/4E-AH, 6/4F-HH, 8/6E-AH, 10/8E-M, 10/8ST-AH, 12/10ST-AH, 14/12ST-AH, 16/14TU-AH, 18/16TU-AH, 20/18TU-AH etc. Slurry pump Lantern Restrictor Part Codes: B118C21, C118C21, D118C21, E118C21, F118C21, G118C21, H118C21, B118C23, C118C23, D118C23, E118C23, F118C23, G118C23, H118C23, B118K31, C118K31, D118K31, E118K31, F118K31, G118K31, H118K31, ect. Tobee® Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead&zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee Pump Part Lantern Restrictor G118-C23 is used for 16x14 AH slurry pumps, 10x8ST-AH slurry pump, 12x10ST-AH slurry pump and 14x12ST-AH slurry pump.In slurry pumps, a slurry pump lantern restrictor is located between slurry pump gland packing and slurry pump impeller. It works as a lantern ring, but at the same time has clearances that restrict the flow into the pump. These clearances result in significantly more flush water being required, as there is no longer the interference fit between the ring of gland packing and slurry pump shaft. By using a lantern restrictor, if the gland flush is always on, at a higher pressure than in the slurry pump wet end parts and the flush water is clean, the packing never encounters slurry and the sleeve and packing life is usually acceptable. Because the sleeve remains in good condition, the leakage is acceptable. Slurry Pump Lantern Restrictor Part Codes: B118C21, C118C21, D118C21, E118C21, F118C21, G118C21, H118C21, B118C23, C118C23, D118C23, E118C23, F118C23, G118C23, H118C23, B118K31, C118K31, D118K31, E118K31, F118K31, G118K31, H118K31... Tobee® Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead&zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® Slurry Pump Spare Parts China are interchangeable with AH/HH/L/M slurry pump parts and designed by spatial structure CFD and impeller casting CAE, Precision casting and professional heat treatment process make the parts upto more higher hardness, Precision machining and painting technology ensure the parts are more conformable with fluidics, With strict quality control, Tobee’s high chrome wear parts provide users with longer 30%-60% wear life and higher efficiency due to advanced manufacturing processes. Increasing users enjoy perfect fit and finish to reduce installation workload. Tobee® Slurry Pump Spare Parts China: Impellers: 1.5/1B-AH~8/6E-AH Volute liners: 1.5/1B-AH~8/6E-AH Throatbush: 1.5/1B-AH~8/6E-AH FPL insert: 6/4D-AH~8/6E-AH Materials: Si3N4-SiC Slurry Pump Lantern Restrictor Part Codes: B118C21, C118C21, D118C21, E118C21, F118C21, G118C21, H118C21, B118C23, C118C23, D118C23, E118C23, F118C23, G118C23, H118C23, B118K31, C118K31, D118K31, E118K31, F118K31, G118K31, H118K31... Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Tobee® G029HS1A05 Slurry Pump Expeller Ring is interchangeable with original 12/10 AH slurry pumps expeller rings, The expeller ring is together work with expeller for slurry pumps. They can not only help seal the pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life, Tobee offers expeller in cast iron and high chrome and rubber materials for options. Slurry Pump Spare Parts 029 Expeller Ring: Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints. Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. Tobee® Slurry Pump Spare Parts Applications: Heavy Mining | Mineral Processing | Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Washdown | Floor Drainage | Mixing Slurry Pump Packing & Delivery： To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided. Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

G118-1-K31 Lantern Restrictor of 14x12ST-AH Centrifugal Horizontal Slurry Pump Spare Parts. In slurry pumps, a slurry pump lantern restrictor is located between slurry pump gland packing and slurry pump impeller. It works as a lantern ring, but at the same time has clearances that restrict the flow into the pump. These clearances result in significantly more flush water being required, as there is no longer the interference fit between the ring of gland packing and slurry pump shaft. By using a lantern restrictor, if the gland flush is always on, at a higher pressure than in the slurry pump wet end parts and the flush water is clean, the packing never encounters slurry and the sleeve and packing life is usually acceptable. Because the sleeve remains in good condition, the leakage is acceptable. 14x12ST-AH Slurry Pump is made for high wearing and heavy duty applications. 14x12 slurry pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the toughest and most abrasive applications. Design Features: Power End √ Labyrinth bearing isolators to protect internal components during wash-down cycles. √ Clearances can be easily adjusted to maintain efficiency while optimizing performance and extending wear life. √ Over-sized, self-aligning spherical roller bearings for trouble free operation. √ Heavy duty bearing assembly, 50,000 hour minimum L10 bearing life, Distortion free bearing clamp system ensures maximum bearing life and prevents premature fatigue. Wet End √ Maintenance friendly split casing for elastomer liners (lined wet end). √ Static vanes reduce wear and prevent erosion. √ Tangential discharge improves efficiency and reduces wear. √ Optimized hydraulics for high efficiency and low wear. √ Dowel pins for easy and accurate split case alignment (lined wet end). √ Ribs designed for optimized strength/weight. √ Static suction vanes extend wear life (metal wet end). √ Patented flange system for ease of maintenance (metal wet end). √ Adjustable suction cover on sizes 200 and larger to optimize efficiency and minimize wear. Sealing arrangements: √ Packed gland with expeller configuration (other sealing options available). √ Split stuffing box for simplified installation and adjustments. √ Mating shaft sleeves with engineered materials for extended life. Tobee 14/12 ST AH Slurry Pumps Applications: The 14/12 ST AH Slurry Pumps are widely used to transport high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones, lime and etc. in the industries of metallurgy, mining, coal, power, building material and etc. The temperature of the pumped solid-liquid mixture should be ≤80℃, and the weight concentration should be ≤60. Contact UsContact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition, So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions. Slurry Pump Mechanical seal is widely used in chemical slurries, alumina plant, FGD systems, power plant ash handling systems, pulp and paper and other industries. The mechanical seal consists of a stationary and a rotating face pressed together under mechanical and hydraulic pressure to prevent leakage. Silicon carbide is the most common material used for manufacture of these seal faces. The use of mechanical seals in slurry applications requires extreme care and attention due to the limited reliability common in this developing area. Sea costs are relatively high and require substantial justification to warrant their use. Tobee® Slurry Pump Mechanical Seal is mainly used for chemical slurries, dredging, alumina plant, flue gas desulfurization systems power plant ash handling systems, pulp and paper and other industries, It can be installed on slurry pump, gravel pump, dredge pump, FGD pump, sewage pump, clean water pump, chemical pump, oil pump for different work condistions.Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

C2110-A05A High Chrome Alloy Volute Liner is one of the wear parts for 3x2 C-AH Centrifugal Horizontal Slurry Pump. Slurry Pump Volute Liners C2110 are interchangeable with 3/2 CAH slurry pump volute lines. It is also one of wetted parts for slurry pumps. It forms a pump chamber with throat bush and frame plate liner insert and so slurry will wash them, Slurry pump volute Liner is a curved funnel increasing in area to the discharge port. It is often used together with impeller for slurry pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the slurry pump. materials can be high chrome alloy, Natural Rubber, Polyurethane for different working applications.Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store

8x6E-AH Slurry Pump is used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications, Sometimes, it could also be used in dredging and drilling mud application etc. Tobee® 8/6E AH Series Slurry Pump Specifications: Size: 8" x 6" Capacity: 360-828m3/h Head: 10-61m Speed: 500-1140rpm NPSHr: 2-9m Eff.: 72% Power: Max.120kw Handling solids: 63mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc Tobee® 8/6E AH Series Slurry Pump Design Features: √ Bearing assembly - large diameter shaft with short overhang contributes to long bearing life. √ Liners - easily replaceable liners are bolted, not glued to the casing for positive maintenance. √ Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities. √ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal.Contact information： Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317 Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store